Magnum MD 308 Bedienerhandbuch

Magnum Dynalab MD 308 INTEGRATED AMPLIFIER INSTRUCTION MANUAL

- 10 - TROUBLESHOOTING PROBLEM POSSIBLE CAUSE POSSIBLE SOLUTION No sound, meter lights are not on • Power cord disconnected • Power off at so

- 11 - SAFETY SHEET IMPORTANT SAFETY INSTRUCTIONS 1. KEEP THESE INSTRUCTIONS 2. HEED ALL WARNINGS 3. FOLLOW ALL INSTRUCTIONS 4. DO NOT USE THI

- 12 - LIMITED WARRANTY Register your product at www.magnumdynalab.com Magnum Dynalab Ltd. herein referred to as the “manufacturer” guarantees thi

- 2 - TABLE OF CONTENTS A MESSAGE FROM THE PRESIDENT 3 UNPACKING YOUR MD 308 4 SETTING UP THE MD 308 5 CONNECTING SPEAKERS AND POWERING THE MD 308

- 3 - A Message From the President Thank you for choosing the Magnum Dynalab MD 308 Integrated Amplifier. Great care has been given in the design,

- 4 - UNPACKING YOUR MD 308 Carefully inspect all sides of the shipping carton for damage. If there are marks or holes in the carton make note of t

- 5 - SETTING UP THE MD 308 1. Position the receiver away from any spot which may have extremes in temperatures. 2. Place the receiver on a very

- 6 - HOOKING UP SOURCES TO THE MD 308 1. Using your RCA cables, plug the other source into one of the inputs marked in the back of the MD 308. 2.

- 7 - 6. Input A4 is now the dedicated input for you to listen and control volume with your home theater processor (Meaning that when you listen to

- 8 - CONTROL & DISPLAY FUNCTIONS 1. LEFT BALANCE INDICATOR: This will light up when you change the output balance of the amplifier. Note that

- 9 - RC8 REMOTE CONTROL Unpacking the Remote: • Remove the remote from its plastic bag, and install the 3 AA batteries provided • Test the remote