Magnum MMG75D Betreibershandbuch PDF herunterladen (Seite 39)

BASIC MAINTENANCE SCHEDULE - JOHN DEERE ENGINE

Refer to the original equipment manufacturer’s operating manual for a complete list of

maintenance requirements. Failure to comply with the procedures as described in the engine

operator manual will nullify the warranty, decrease performance and cause equipment

damage or premature equipment failure. Maintenance records may be required to complete

a warranty request.

Use the schedule in the following table as a guide for regular maintenance intervals. For additional or replacement

copies of the engine operator’s manual, contact an authorized dealer in your area.

* Replace primary air cleaner when dust valve restriction indicator gauge shows a vacuum of 25 in. H

** Change the oil and oil filter after the first 100 hours, then every 500 hours. If not using John Deere Plus 50 II

engine oil, the interval must be decreased to every 250 hours.

EXHAUST FILTER SERVICE REQUIREMENTS

The exhaust filter system contains a Diesel Particulate Filter (DPF). Over time, the DPF will require professional

servicing to remove ash buildup. The expected service interval will be at least 3000 or 4500 hours based on engine

power and operating conditions. Actual service should take place when the indicator light appears on the control

panel LCD. The DPF should be cleaned or replaced by an authorized service provider only. The removal of DPF

Item Daily

250

Hrs.

500

Hrs./12

Months

3000

Hrs./ 36

Months

Required

Check Oil Level 

Check Coolant Level 

Check Fuel Level 

Check Tire Pressure 

Check All Electrical Connections 

Inspect Radiator Fins For Debris, Clean As Required 

Check Fuel Filter/Water Separator Bowl 

Check Air Cleaner Dust Valve Restriction Indicator Gauge *

Perform Visual Walkaround Inspection 

Check Oil Vapor Recirculation System/Non-Return Valve 

Change Engine Oil and Replace Oil Filter **

Replace Oil Vapor Recirculation Filter 

Service Battery 

Replace Fuel Filter Elements 

Check Engine Mounts 

Check Air Intake Hoses, Connections, and System 

Check Engine Electrical Ground Connection 

Check Automatic Belt Tensioner and Belt Wear 

Check Cooling System 

Lubricate Leveling Jack(s) 

Check Generator Drive Plate Torque (see page 41) 

Test Thermostats 

Replace Air Cleaner Elements 

Replace Alternator and Fan Belts 

Check Fuses 

Add Coolant 

Check Electrical Wiring and Connections 

1 2 ... 34 35 36 37 38 39 40 41 42 43 44 ... 51 52

Kommentare zu diesen Handbüchern

Keine Kommentare

Magnum MMG75D Betreibershandbuch Seite 39

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Stromgeneratoren Magnum MMG75D